Esylux Presence Detector 180° 230V IP20 Opal Mat

Description

Presence detector with 180° monitoring area for wall mounting. Automatic lighting control based on presence and daylight. Fits with 16 A high-power relay (tungsten contact) especially good for switching on/off capacitive loads such as e.g. EL-FDs, parallel-compensated fluorescent lamps, compact fluorescent lamps, energy-saving lamps. Extra break contact "VVK" for control of heating-ventilation-climate based on presence. Programmable with remote control, e.g. permanent light ON/OFF and automatic reading of the current light value. With cover frame IP 20 in 5 different colors.

Compatible with branded switches, can therefore replace all commercially available switches. IP 44 design, suitable for damp areas, garages and basement entrances. Vandal-proof cover frame with stainless steel screws (accessory). Extra button input for individual, manual switching on/off of the lighting. Manual on/off using built-in ON/OFF/AUTO switch. Unwanted switching on/off, of e.g. small animals, can be prevented by blinding the vertical surveillance area with a shielding cover, which is ordered separately. Universal surface-mounted box IP 20/IP 44 with 3 membrane penetrations for cables. Expansion of the surveillance area by connecting a slave presence detector (from detector version 07/2007). Built-in impulse function for controlling stair switches or signal units and use with building technology/memory controllers.

Performance

• Current e.nr 1903341
• Mains voltage 230 V AC, 50 Hz
• Young. power consumption 1.0 W
• Surveillance area 180° horizontally, 60° vertically
• Range approx. 8 m at a mounting height of 1.1 m - 2.2 m
• Setting options mechanically via setting regulator, electronically via the IR remote control Mobil-PDi/MDi (ordered separately)

Channel 1:

• lighting - Switching power 230 V AC, 50 Hz/(16 A relay), 2300 W/10 A (cos phi = 1), 1150 VA/5 A (cos phi = 0.5) capacitive load/EL-FDs max. inrush current 450 A/200 µs30 x (1 x 18 W), 20 x (2 x 18 W), 25 x (1 x 36 W), 15 x (2 x 36 W), 20 x (1 x 58 W), 10 x (2 x 58 W)
• Button input 1: yes
• Afterglow time: impulse/approx. 15 sec. - 30 min
• Light metering: mixed light
• Light value: approx. 5 - 2000 lux

Channel 2:

• HVAC contact: potential-free, 230 V AC/2 A, 24 V DC/2 A
• Max. switching power: 100 W/460 VA
• Afterglow time: impulse/approx. 5 min. - 120 min
• Afterglow time: impulse/approx. 15 sec. - 30 min
• Slave input: yes
• Permissible ambient temperature0 °C...+50 °C
• Protection class: IP 20, IP 44 depending on cover frame (ordered separately)
• Protection class: II
• Control mark: TÜV Süd
• Mounting method: wall mounting
• Material in the cover: UV-stabilized polycarbonate
• Young. measurement height 70 mm x width 70 mm x length 63 mm

Technical Information

• Model/Version: Presence detector
• Sensor type: Passive infrared
• HVAC control: Yes
• Number of switching zones: 1 Width 70 mm
• Detection angle horizontal from/to: 90 - 180 °
• Diameter (installation dimensions): 60 mm
• Diameter range on floor: 16 m
• Remote controlled: Yes
• Forced disconnection: Yes
• Forced power on: Yes
• Frequency range: 50 - 50 Hz
• Switch-off delay: 30 s
• Installation width: 61 mm
• Installation depth: 34 mm
• Installation length: 61 mm
• Adjustable light value: Yes
• Protection class (IP): IP20
• Max. connection time: 30 min
• Max. presence area: 6.29 m²
• Max. switching power: 2300 W
• Max. range forward : 3 m
• Max. lateral reach: 8 m
• Max. starting current: 800 A
• Max. switching power LED: 600 W
• My. switch-on time: 12 s
• Minimum depth of recessed installation box: 34 mm
• Mounting method: Recessed mounting
• Rated voltage: 230 - 230 V
• Nominal voltage: 230 V
• Inverter input: Yes
• Optimal mounting height: 1.1 m
• Scanning angle: 180 °
• Voltage type: AC
• Control current: 0 mA
• Response value adjustable sensitivity: Yes
• Response value luminosity: 5 - 2000 lx
• Swing range sensor, horizontal: 0 - 0 °
• Swing range sensor, vertical: 0 - 0 °
• Teach function for response value luminosity: Yes
• Temperature range: 0 - 50 °C
• Switch-on delay: 0 s
• Type of connection: Plug-in terminal (quick terminal)

Specifications

• Material: Plastic
• Material quality: Thermoplastic
• Suitable for wall mounting: Yes
• Suitable for wall mounting: Yes
• Transparent: Yes
• Staircase light control: Yes
• Type of surface: Matt
• Under-creep protection: Yes
• Surface treatment: Untreated
• Depth: 70 mm
• Height: 55 mm