LK Distributor Cabinet UNI 550 FH White

Description

LK Distributor Cabinet UNI 550 FH is for holiday homes and villas where there is no need for a water meter connection. Made of powder-coated steel sheet, white color RAL 9016 and has a waterproof bottom with a 50 mm high front edge. The cabinet is intended for incoming water up to a dimension of 40 mm, maximum empty pipe dimension 50 mm, with holes in the bottom to be able to feed incoming water from the right or left side. The cabinet has space for two LK Distributor pipes with the possibility of connecting up to seven connections. Holes and knock-out holes are also in the top of the cabinet to enable connection up, as well as the possibility of a continuous trunk or feed to, for example, the second floor. The cabinet also has a knock-out hole in the side to enable connection from there.

LK Drainage bend V2 complete is included for the leak indication from the wall. Protective bag to put over the cabinet during construction is included. 1 pipe penetration 50 LP and 3 pipe penetrations 25-40 LP are included but the cabinet is supplemented with the required number of cabinet penetrations, separate article:

• Pipe dim. 12-16-20 use LK Pipe penetration 12-20 LP.
• Pipe dim. 20-25 use LK Pipe penetration 20-25 LP.
• Pipe and empty pipe dim. 25 use LK Pipe penetration 25 LP.
• Pipe and empty pipe dim. 32-34 use LK Pipe penetration 32-34 LP.
• Empty pipe dim. 44 mm use LK Pipe Grommet 32 RiR LP.

NOTE! In cases where a main line is routed inside the cabinet, the maximum number of outlets may be reduced by one or more outlets.

Specifications

• Size: 550x550x95 mm (W×H×D)
• Function: For LK UNI manifolds
• Version: With waterproof bottom
• Color: White RAL9016
• Surface treatment: Powder coated
• Material: Sheet steel
• Material housing/enclosure/frame: Steel
• Surface protection housing/enclosure/frame: Painted
• Color housing/enclosure/frame: White
• RAL number housing/enclosure/frame: 9016
• With frame for door: No
• With door: No
• Adapted for connection to waterproofing: No
• With waterproof bottom: Yes
• With pipe penetration seal: No
• With splash guard: Yes
• With brackets for manifolds: Yes
• With outlet for leakage indication: Yes
• Suitable for built-in/recessed installation: Yes
• Suitable for surface-mounted installation: Yes
• Open holes top: No
• Number of holes top: 15
• Open holes side: No
• Number of holes per side: 4
• Open holes bottom: Yes
• Number of holes bottom: 15
• With pre-assembled distributor: No
• Type approved according to BBR/EKS: Yes