Wilo DrainLift, SANI-L.16M/1, Pump Station

Description

Compact, ready-to-connect and fully submersible twin-pump pumping station for pumping sewage with faeces. Gas and watertight collection container with sloping floor at an angle and a service opening with a transparent cover. Freely selectable inlets within the marked areas. Level measurement performed with an analog output signal 4 ... 20 mA. Pressure connection fitted with a non-return valve including a service opening. Surface-cooled motor with thermal engine monitoring.

Pre-installed automatic cabinet for automatic operation: Total alarm with potential-free contact, Integrated and mains-independent alarm, Adjustable delay time, 1.5 m connection cable with fitted plug.

Hydraulic Data

• Maximum operating pressure PN : 4 bar
• My. medium temperature Tmin : 3 °C
• Max. medium temperature Tmax : 40 °C
• Ambient temperature min. Tmin : 3 °C
• Max. ambient temperature Tmax : 40 °C
• Max. medium temperature, short-term operation up to 3 min T : 65 °C
• level : 70 dB
• Connection volume V: 60 l
• Effective volume at 180 mm inlet height V: 60 l
• Effective volume at 250 mm inlet height V : 76 l
• Effective volume at 315 mm inlet height V: 91 l
• Cutting tools: none

Engine Data

• Mains connection : 1~230 V, 50 Hz
• Rated current IN : 9.3 A
• Protection class : IP68
• Phase : 1
• Rated speed n : 2852 1/min
• Number of poles: 2
• Grant Type : Direct Online (DOL)
• Max. breaking frequency t : 60 1/h
• Supplied power P1(Q=max.) for the selected impeller * number of pumps P1 : 2100 W
• Operating mode per pump : S3-10%, 60 s
• Insulation class: F

Material

• Pump housing : PP-GF30
• Impeller : PP-GF30
• Shaft: stainless steel
• Material motor: stainless steel

Installation Dimensions

• Pipe connection on the pressure side: DN 80

Measure

• Length: 852 mm
• Height: 571 mm
• Width: 635 mm