Wilo Padus MINI3, M04.12/T06-540/O, Drainage Pump
Submersible pump for stationary and transportable wet installation in intermittent operation.
Watch this product and we will notify you once it is back in stock.
Wilo Padus MINI3, M04.12/T06-540/O, Drainage Pump
Description
Submersible pump for stationary and transportable wet installation in intermittent operation :Use :For pumping in houses of: Waste water without faeces :Waste water (with small amounts of sand and gravel) :Construction :Drainage pump with free-flow impeller and vertical threaded connection. Plastic hydraulic housing and impeller. Surface-cooled 3~ motor with self-regulating thermal motor monitoring. Engine housing made of stainless steel. Oil-filled sealing chamber with double seal: on the motor side there is a shaft sealing ring and on the pump side there is a mechanical seal. Detachable connection cable with free cable end, for fixed connection to control on site. Pump without level rocker and plug!
Specifications
- Product name: Padus MINI3-M04.12/T06-540/O-10M
- Color: silver/black
Hydraulic Data
- Maximum operating pressure p: 1.8 bar
- Pressure connection: G 1½
- Free passage for the hydraulics: 10 mm
- Type of impeller construction: Semi-open multi-channel impeller
- Max. immersion depth: 7 m
- Call height max. Hmax: 12.2 m
- Flow max. Qmax: 19.5 m³/h
- My. medium temperature Tmin: 3 °C
- Max. medium temperature Tmax: 40 °C
- Ambient temperature min. Tmin: 3 °C
- Max. ambient temperature Tmax: 40 °C
Engine Data
- Mains connection: 3-400 V, 50 Hz
- Voltage tolerance: ±10%
- Motor rated power P2: 0.6 kW
- Capacity factor: 0.77
- Power consumption P1 max: 0.83 W
- Rated current IN: 1.6 A
- Starting current I: 7.6 A
- Rated speed n: 2900 1/min
- Max. breaking frequency t: 30 1/h
- Insulation class: F
- Protection class: IP68
- Operating mode (submerged): S1
- Operating mode (not submerged): S3-20%
Cable
- Length of connection cable: 10 m
- Cable type: H07RN-F
- Cable cross section: 4G1 mm²
- Type of connection cable: Not detachable
Material
- Pump housing: PP-GF30
- Impeller: PK-GF30
- Shaft: stainless steel
- Material seal on the pump side: Carbon, plastic impregnated
- Material motor: stainless steel
Installation Dimensions
- Pipe connection on the pressure side: G1½
Measure
- Length: 245mm
- Height: 386mm
- Width: 183mm

