LK Distribution Cabinet Qmax 1050x710x190mm
Distribution cabinet Qmax is for use where you want to hide LK Distribution Cabinet Qmax G50, cabinet has tight bottom with rubber pipe penetrations.
Watch this product and we will notify you once it is back in stock.
LK Distribution Cabinet Qmax 1050x710x190mm
Description
LK Distribution Cabinet Qmax is intended for use where you want to hide LK Distribution Cabinet Qmax G50. LK Manifold Cabinet Qmax with the associated assembly instructions is adapted to the Industry Regulations Safe Water Installation. The cabinet has a tight bottom with rubber pipe penetrations. The cabinet bottom is equipped with a drain fitting, which means that any leakage water is drained to an inspectable location. The cabinet is made of 1 mm powder-coated steel sheet, RAL 9016. The cabinet is intended for installation built into the wall or externally on the wall. The minimum stud thickness for installation is 190 mm. The cabinet must be installed in accordance with the Safe Water Installation Industry Regulations.
There are different solutions for the frame/door for the cabinet, depending on where the cabinet is installed and the aesthetic requirements. The standard frame/door is made of powder-coated steel sheet, RAL 9016. There are two types of standard frame/door depending on whether the cabinet is mounted inside or outside on an inner wall. When mounted outside, the cabinet must also be supplemented with a base to hide pipes between the cabinet and the floor. When mounted in a room with a waterproofing layer on the wall, the cabinet must be supplemented with LK Wet Zone Door Preseal, which is connected to the wall's waterproofing layer.
For a discreet / hidden installation of LK cabinets, it is advantageous to use LK Gypsum Door Hidden. LK Distribution Cabinet Qmax is delivered with LK Console Qmax, pipe penetrations, bellows sleeve for drainage, 1.5 meter empty pipe for drainage, drainage bend with outlet plate, cable penetrations for room control, spray protection and installation instructions.
The back of the cabinet is equipped with four pre-assembled M8 nuts that can be used for attachment to the LK Cabinet Stand when you want to mount the cabinet before a concrete slab is cast. The cabinet ends are equipped with knockout holes for possible side connection of the supply and return line. The top of the cabinet has knockout holes for possible trunking through the cabinet and knockout holes for upward pipe routing. The maximum pipe dimension for trunking is 50 mm. For cable penetration to room control, etc., there are knockout holes in the top of the cabinet. NOTE! In cases where a trunking is routed inside the cabinet, the maximum number of outlets may be reduced by one or more outlets.
Specifications
- Size (WxHxD): 1050x710x190mm
- Function: For LK Manifold Qmax G50
- Design: Waterproof built-in cabinet
- Color: White
- Surface treatment: Powder coated
- Material: Sheet steel
- Material housing/enclosure/frame: Steel
- Surface protection housing/enclosure/frame: Lacquered
- Color housing/enclosure/frame: White
- RAL number housing/enclosure/frame: 9016
- With frame for door: No
- With door: No
- Width: 1050 mm
- Height: 710 mm
- Depth: 190 mm
- With waterproof bottom: Yes
- With pipe penetration seal: Yes
- With splash guard: Yes
- With brackets for manifold: Yes
- With outlet for leakage indication: Yes
- Suitable for built-in/recessed installation: Yes
- Suitable for surface-mounted installation: No
- Open holes top: Yes
- Number of holes top: 10
- Open holes side: No
- Number of holes per side: 2
- Open holes bottom: Yes
- Number of holes bottom: 18

